World Library  
Flag as Inappropriate
Email this Article

Colt Official Police

Article Id: WHEBN0019189514
Reproduction Date:

Title: Colt Official Police  
Author: World Heritage Encyclopedia
Language: English
Subject: Colt M1889, Colt Trooper, Colt M1892, Colt Model 1903 Pocket Hammer, Colt Model 1903 Pocket Hammerless
Publisher: World Heritage Encyclopedia

Colt Official Police

Colt Official Police
Type Revolver
Place of origin  United States
Production history
Manufacturer Colt's Manufacturing Company
Produced 1908-1969
Variants See Variants
Barrel length
  • 4 in (102 mm)
  • 5 in (127 mm)
  • 6 in (153 mm)

Action double-action
Feed system six round cylinder
Sights Fixed iron: Blade front, V-notch rear

Introduced to the firearms market in 1927, the Colt Official Police is a medium frame, six-shot, double-action revolver with a six-round cylinder, primarily chambered for the .38 Special cartridge, and manufactured by the Colt's Manufacturing Company. The intended specific target market for the Official Police was mainly law enforcement agencies and it became one of the best selling police firearms of all time, eventually in the 1950s coming to exemplify typical peace officer weaponry.[1] The Official Police was also used by various U.S. and allied military forces during World War II.

Development and history

As the 20th Century began, the older .32 caliber revolvers which had been standard-issue for the majority of American police departments began to be phased out in favor of the larger-bore .38 caliber. In 1908 Colt introduced a sleek and modernized revolver they dubbed the Army Special, which in the powerful (for the time) and popular .38 Special quickly became the issue service revolver of many departments.[1][2][3] During the same period, revolvers began to fall out of favor with the U.S. Military, especially after the adoption on the U.S. Model of 1911 semi-automatic pistol.[1] As military sales of their revolvers dropped off, Colt searched for an alternative market and realized the popularity and strong sales of their product line with civilian law enforcement agencies could form their replacement market.[2]

By 1927 the overwhelming sales of two popular models, the Army Special and Federal Bureau of Investigation chose the OP as their issue revolver.[1] The U.S. Army also bought some of the revolvers, issuing them to military police and to federal agencies in need of a revolver for their armed agents, such as the Treasury Department, Coast Guard, and the Postal Inspection Service. Many Official Police revolvers were also bought by the police forces and militaries of various South American countries.[1][3]

Between May 1940 and June 1941, 49,764 Official Police revolvers in .38 New Police or .38/200 caliber were purchased by the British Purchasing Commission and shipped to the United Kingdom for use by British and Commonwealth armed forces as a substitute standard sidearm. These revolvers bore British military acceptance markings and had a 5" barrel; the butt was fitted with a military-style lanyard ring. Most of these OP revolvers were assembled from commercial-grade parts made before 1942.[4]

When the U.S. became involved in World War II, the U.S. government requested contracts to supply .38 revolvers required for arming security personnel charged with the security of government buildings, shipyards, and defense plant installations against sabotage or theft. Commencing in 1941, small quantities of the .38 Colt Official Police were procured directly from the Defense Supplies Corporation (DSC). When government purchasing officials objected to production delays of the OP, as well as the unit cost, Colt responded by simplifying the gun. Savings were achieved by eliminating all unnecessary exterior polishing operations, substituting a smooth-face trigger and hammer, and fitting the gun with simplified checkered wood grips with the Colt medallion; the latter was soon replaced by 'Coltwood' molded plastic grips. Instead of the normal bluing, the revolver was given a dull parkerized finish. Dubbed the Colt Commando, the weapon was primarily used to arm units of Military police, security guards at U.S. defense plant installations and shipyards, as well as limited clandestine issue to agencies involved in overseas espionage and military intelligence.[1][2][5]

In mid-1942 the Springfield Ordnance District (SOD) was given control over procurement and distribution of the Commando, which transferred the revolvers to the end user. A few Commandos were shipped to the U.S. Maritime Commission and used as small arms equipment on U.S. merchant ships and ships provided to the Allies under Lend-Lease.[6] Most Commando wartime production went to the Defense Supplies Corporation (DSC).[7] for use by security and police forces, while approximately 1,800 Commandos were used by the U.S. Navy, with another 12,800 revolvers distributed to various military intelligence agencies. Control over procurement changed in 1944, after the DSC formally objected to being charged additional handling fees by the armed forces, and was then authorized to procure the Commando directly from Colt.[7]

After the Allied victory, Colt resumed commercial production and returned to the prewar polished blued finish, but retained the plastic grips which they labeled “Coltwood” until 1954 when the checkered wooden grips were reintroduced.[1] During the postwar period, Colt fell on difficult financial times and the company introduced few new models. At Smith & Wesson, both output and new model civilian and police sales improved, and the sales margin gap between the two corporations progressively tightened. Finally in the 1960s S&W took over the lead.[1][2] A contributing factor to this change may have been Smith & Wesson's generally lower cost per unit, accompanied by a double-action trigger pull on their military & police model that was preferred by many agencies teaching the new combat-oriented double-action revolver training.[1][2] Colt announced the discontinuation of the Official Police in 1969, stating that competitive production of the design was no longer economically feasible.[1][2] With a total production of over 400,000 pistols, the Official Police ranks as one of the most successful handguns ever made.[1]


The Official Police was machined of fine carbon steel, with bright royal Colt blued as well as nickel plated finishes, and was offered in 4, 5 and 6 inches (100, 130 and 150 mm) barrels. Built on Colt’s .41 or “I” frame, it was manufactured in a variety of chamberings including .22 LR, .32-20 (discontinued in 1942), .41 Long Colt (discontinued in 1938), and the most common and popular, the .38 Special.[1][2] Colt’s “Positive Lock” firing pin block safety was a standard feature of the revolver, preventing the firing pin from striking the primer unless the trigger was deliberately pulled.[1] The pistol’s sights consisted of a blade front with a fixed iron open rear sight, which was a simple V-notch shaped groove milled into the revolver’s top strap. The top strap had a matte finish to reduce glare down the sight plane.[1][2]



The Commando was a wartime variant of the Official Police, manufactured with either a two or four inch barrel, and incorporating several production economies including a non-gloss Parkerized finish. The Commando also lacked the usual metal checkering on the hammer, trigger, and cylinder latch, as well as the reflection-deadening treatment of the commercial version’s top strap. In addition, plastic material replaced the wood grips of the civilian model.[8] Approximately 48,611 Commando revolvers were purchased by the government during the war.[8] Of this total, approximately 12,800 Commando revolvers were issued to various intelligence services such as US Military intelligence and the Office of Strategic Services (OSS). Many of the latter were procured with the two-inch barrel, referred to as the “Junior Commando”.[8] A few Commandos saw service overseas in the war zone.[8] Regular production deliveries of two-inch "Junior Commando" revolvers began in March 1943, at approximately serial number 9,000. More than 12,000 of the two-inch Commandos encountered today are actually postwar conversions from four-inch models produced during the war.[8]


A rare variant featuring a rounded grip, with barrel lengths of two and four inches. With a very limited production run of 2,500 units produced from 1955-1956, the Marshal became a true collectable.[2]


The moniker “Official Police” was borrowed by one model in a new generation of revolvers Colt introduced in the late1960s, called the “MK III” series. MK III models consisted of simpler versions of several classic Colt revolvers with updated lockwork.[9] The MK III product line was actually a different and original design based on a new “J” frame, which failed to attain commercial success and was cancelled after only three years.[1][9]

See also


  1. ^ a b c d e f g h i j k l m n o p q r s “Colt's Official Police Revolver”, Shooting Times magazine Web site – Handgun Reviews. Accessed August 13, 2008.
  2. ^ a b c d e f g h i j k l Ayoob, Massad. “The Colt Official Police: 61 years of production, 99 years of service”, Guns magazine. BNET Web site – Find articles. Accessed August 13, 2008.
  3. ^ a b c “Colt Official Police”, Bellum Web site. Accessed August 20, 2008.
  4. ^ Pate, Charles, U.S. Handguns of World War II, Andrew Mowbray Publishing, ISBN 0-917218-75-2, ISBN 978-0-917218-75-0
  5. ^ “Colt Commando”, Bellum Web site. Accessed August 21, 2008.
  6. ^ Pate, Charles, The World War II Commando Revolver, Man At Arms Magazine, Mowbray Publishing (October 1997), retrieved 3 April 2011
  7. ^ a b Pate, Charles, The World War II Commando Revolver, Man At Arms Magazine, Mowbray Publishing (October 1997), retrieved 3 April 2011
  8. ^ a b c d e “The World War II Commando Revolver”, Man at Arms Web site. Accessed August 21, 2008.
  9. ^ a b “Colt mk. III revolvers: Trooper, Lawman, Official Police (USA)”, Web site. Accessed August 21, 2008.

External links

  • The Colt Revolver in the American West—Official Police Model
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.