World Library  
Flag as Inappropriate
Email this Article

Multilayer switch

Article Id: WHEBN0000235110
Reproduction Date:

Title: Multilayer switch  
Author: World Heritage Encyclopedia
Language: English
Subject: Arista Networks, Catalyst 6500, ERS, Label switching, Network switch
Collection: Networking Hardware
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Multilayer switch

A multilayer switch (MLS) is a computer networking device that switches on OSI layer 2 like an ordinary network switch and provides extra functions on higher OSI layers.

Contents

  • Layer 3 switching 1
  • Multilayer switch (MLS) - OSI layer 3 and/or 4 2
  • Layer 4-7 switch, web-switch, content-switch 3
  • Layer 4 load balancer 4
  • See also 5
  • References 6
  • External links 7

Layer 3 switching

The major difference between the packet switching operation of a router and that of a layer 3 switch is the actual implementation. In general-purpose routers, packet switching is usually implemented in software that runs on a microprocessor, whereas a layer 3 switch performs the same operation using dedicated application-specific integrated circuit (ASIC) hardware.[1]

Multilayer switch (MLS) - OSI layer 3 and/or 4

A multilayer switch (MLS) can prioritize packets by the 6 bits in IP DSCP (differentiated services CodePoint). These 6 bits were used in the "old days" for Type of Service (ToS).

The following 4 mappings are normally available in an MLS:

Many MLSs implement QoS differentiated services and/or integrated services in hardware.

Some MLSs are also able to route between VLANs and/or ports like a common router. The routing is normally as quick as switching (at wirespeed). According to Cisco, Layer 3 switches are basically routers that switch based on Layer 3 information, the basic difference being processing speed and/or the way they do the switching; Layer 3 switches use ASICs/hardware instead of the CPU/software that a router would.

Layer 4-7 switch, web-switch, content-switch

Some switches can use up to OSI layer 7 packet information; these may be called layer 4-7 switches, content-switches, content services switches, web-switches or application-switches.

Content switches are typically used for load balancing among groups of servers. Load balancing can be performed on HTTP, HTTPS, VPN, or any TCP/IP traffic using a specific port. Load balancing often involves destination network address translation so that the client of the load balanced service is not fully aware of which server is handling its requests. Some of the layer 4-7 switches can perform NAT at wirespeed. Also, content switches can often be used to perform standard operations such as SSL encryption/decryption to reduce the load on the servers receiving the traffic, or to centralise the management of digital certificates. Layer 7 switching is the base technology of a content delivery network.

Some types of applications require that repeated requests from a client are directed at the same application server. Since the client isn't generally aware of which server it spoke to earlier, content switches define a notion of stickiness. For example, requests from the same source IP address are directed to the same application server each time. Stickiness can also be based on SSL IDs, and some content switches can even use cookies to provide this functionality.

Layer 4 load balancer

A typical network router simply sends incoming packets onto the appropriate IP address on its network. A layer 4 router, more correctly a NAT with port and transaction awareness, usually performs a form of port translation for sending incoming packets to one or more machines that are hidden behind a single IP address.

The layer 4 refers to the 4 layer OSI model. The router is on the Transport Layer and makes decisions on where to send the packets. Modern load balancing routers can use different rules to make decisions on where to route traffic. This can be based on least load, or fastest response times, or simply balancing requests out. This is also a redundancy method, so if one machine is not up, the router will not send traffic to it.

See also

References

  1. ^ "Multi-Layer Switching". Cisco Systems. Retrieved 2011-02-11. 

External links

  • IETF MPLS Group
  • What is the difference between a Layer-3 switch and a router?
  • Multilayer Switching
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.